About The Characteristics And Operation Problems Of Photoelectric Guide System

The photoelectric guide system is a system for controlling the horizontal position shift of thin soft materials during the transmission process, and has functions of automatic detection, automatic tracking, automatic adjustment and the like. It can automatically track and correct the marking lines or edges of paper, film, non-dry tape, aluminum foil, copper strip, steel strip, non-ferrous metal and other industries to ensure winding and slitting. The photoelectric rectification control system has the characteristics of fast resolving response speed, large thrust, high rectification precision, etc. It can be widely used in printing, packaging and other machinery for automatic rectification control.

The specific characteristics of the photoelectric guide system are as follows:
1. It is mainly used in the printing, packaging, paper, film, textile and other industries where it is necessary to control the curling;
2. Internal quantity intelligent MCU control;
3. The corrective response speed can be adjusted;
4, the belt can provide single electric eye or double electric eye correction tracking;
5. Customize with the line and the heel.

The problem of installation start-up and outage of the photoelectric guide system is explained as follows:
a. Keep the sealed chamber filled with liquid before starting. For transporting the solidified medium, steam is applied to heat the sealed chamber to melt the medium. The car must be driven before starting to prevent the soft ring from breaking due to sudden start.
b. For the mechanical seal using the pump external sealing system, the oil sealing system should be activated first. Finally stop the oil sealing system after parking.
c. After the hot oil pump is stopped, the cooling water of the sealing oil chamber and the end face seal cannot be stopped immediately. When the oil temperature of the end seal is lowered to below 80 degrees, the cooling water can be stopped to avoid damage to the sealing parts.
The quality of the photoelectric correction system is safe and reliable, and is mainly applied to the lateral deviation control of the reel material. The emergence of this photoelectric correction has brought tremendous contributions to the development of the correction industry.