What Are The Construction Of Photoelectric Automatic Guide Controller?

The photoelectric automatic correction controller is composed as follows:
1. Power switch: Total power control of the correction controller.
2. Tension adjustment potentiometer: adjust the magnitude of the tension output current.
3. Tension current indication: displays the value of the current tension output current.
4. Polarity indication: display the current working polarity of the correction controller.
5. Polarity selection button: Select the corresponding correction polarity and polarity selection according to the correction material.
6. Electric eye selection button: Select the corresponding single electric eye or double electric eye mode according to the correction material.
7. Electric eye indication: Display the current electric eye working mode of the correction controller.
8. Manual button: used to select the correction controller to work in manual mode.

Photoelectric automatic correction control system
9. Manual status indicator: This indicator lights when the correction controller is in the manual state.
10. Automatic status indicator: This indicator lights when the correction controller is in the automatic status.
11, automatic button: the same choice of correction controller works in automatic mode.
12. Jog button: Press these two buttons to jog the correcting mechanism to move left or right.
13. Correction speed adjustment button: Press the two buttons to adjust the reaction speed of the correction controller.
14. Correction speed display: Display the correction speed of the correction controller, 0 is the slowest and the fastest.
15. Correction output indication: The two illumination bars respectively indicate the output direction of the correction.
16. Limit indicator: This indicator lights to indicate that the correction mechanism has moved to the limit of the effective correction range.