How Should The Air Shaft Be Used To Save Energy?

With the rapid growth of China's economy, the inflatable shaft machinery industry has become a necessity for people's daily life, as well as people's pursuit of perfection, a large industry that gradually adapts to the needs of economic development. However, the machinery industry in Foshan is still in the development stage. The high level of mechanical output is limited, the scale is smaller than the average, like some small enterprise equipment is relatively backward, can not supply and demand high-end mechanical products, has become a bottleneck that restricts the product quality and affects the rapid development of enterprises.
First, due to the slippery shaft in the past few years, there is no production in the sea, all rely on the entrance, the price is expensive, and the use of the company to create greater economic pressure and throw away the use.
Second, because the product grade is not high, the mechanical cutting requirements are not high, the ordinary air-expansion shaft, mechanical slip shaft can reach the basic use requirements, and the scale of production is small, the production pressure is not big, there is no desire for urgent improvement. And failed to apply.
Third, the propaganda of domestic manufacturers is not enough, and the supporting services are still insufficient.
Fourth, most manufacturers do not know enough about the difference between the sliding air shaft and the mechanical slip shaft, and the common air shaft. Especially, the cost performance of the slip air shaft and other shafts is not clearly familiar. The high price of the shaft, coupled with the company's product quality, the pursuit of maximum efficiency is not urgent.
The ordinary air expansion shaft consists of two departments: the air expansion shaft and the long expansion tube. The size of the damper is adjusted by the inflation pressure. Because the structure of the bulge is a long strip of the through shaft, there is no section, so there is no slip function. When there are multiple strips, there is no corresponding slippery action due to the change of the tension of the material, which easily causes the coil to be unwound, broken, loose, and unwound, resulting in material loss. The winding speed is low. Adjusting the air pressure should stop and affect the work efficiency. The unified axis cannot be large or small at the same time.
Slitting machine is one of the main independent equipments of mechanical enterprises. The performance and difference of its function directly reflect the level of product quality and production efficiency.
The function of the reel on the machine determines the function of the slitter is good and bad. At present, most of the slitting machines used by China's machinery enterprises are mechanical slip shafts and ordinary air shafts, and the slip air shaft is used less.
The mechanical slip shaft consists of three parts: the optical axis and the slip sleeve and the compression spring adjustment mechanism. The working principle is to adjust the torque force of each slip sleeve on the shaft by pressing the pressing force of the spring adjusting mechanism at both ends of the shaft. Because the structure is that the mechanical pressure is transmitted from both ends of the shaft, the pressure of each slip sleeve is not uniform, so the torque force of each slip sleeve can not be adjusted fully with the change of the tension required for the material change, the slip sleeve The relative sliding is not good, and it is easy to produce irregular winding, broken strips, loose rolls, and unwinding, resulting in material loss. The winding speed is low. When adjusting the pressure, it must be stopped and adjusted to affect the working efficiency.
The sliding air shaft consists of two parts: the air shaft and the slip sleeve. The air expansion shaft adopts the central air pressure control. According to the user model, the online adjustment can be realized without stopping the machine, so that the piston on the shaft is ejected, and each slip sleeve is braked to expand the sliding key, and the paper tube (plastic tube, nylon tube) is fixed. Wait). The torque force of each slip sleeve is adjusted according to the inflation pressure to achieve the adjustment of the required tension of each roll of material on the dividing line, so that the sliding sleeves are relatively slid and the linear speed is automatically adjusted.
Therefore, the mechanical slip axis is solved, and the problem of broken strips, loose rolls, unwinding, etc. caused by the change of the unevenness of the material thickness during the winding of the common air-expansion shaft is avoided, thereby avoiding the material loss caused thereby. And can collect large and small rolls at the same time on the unified slip air shaft. The winding speed is higher. Because the air pressure can be adjusted without stopping, the machine adaptability and work efficiency are greatly improved.