How To Maintain The Guiding System?

The manufacturer of photoelectric web guide device considers the principle and requirements of daily mechanical maintenance of the guide system: the daily maintenance of the equipment is the basic work of equipment maintenance, and must be institutionalized and standardized. For the regular maintenance of equipment, work quotas and material consumption quotas shall be established, and assessment shall be carried out according to the quota. The regular maintenance work of equipment shall be included in the assessment content of the workshop contract responsibility system.
Regular inspection of equipment is a planned preventive inspection. In addition to the human senses, the inspection methods must also have certain inspection tools and instruments. The inspections are carried out according to regular inspection cards. Regular inspections are also called periodic inspections. The mechanical equipment should also be checked for accuracy to determine the degree of accuracy of the equipment.

1. In order to ensure that the mechanical equipment is always in a good technical state, it can be put into operation at any time, reduce the downtime, improve the mechanical integrity rate, utilization rate, reduce mechanical wear, extend the service life of the machine, reduce the mechanical operation and maintenance costs, and ensure safe production. Maintenance of mechanical equipment must be intensified.

2. Mechanical maintenance must implement the principle of “maintenance and maintenance, prevention first”, and do regular maintenance and enforcement, and correctly handle the relationship between use, maintenance and repair, and do not allow it to be used only.

3. Each team must do all kinds of mechanical maintenance work according to the mechanical maintenance procedures and maintenance categories, and must not delay without undue delay. In special circumstances, it may be postponed for maintenance after being approved by the special engineer, but generally it should not exceed half of the specified maintenance interval.

4. Maintenance machinery should ensure the quality, according to the specified items and requirements, item by item, no leakage or no protection. The problems found in maintenance items, maintenance quality and maintenance should be recorded and reported to the department. The manufacturer of photoelectric correcting device believes that the maintenance personnel and maintenance department should do “three inspections and one handover (self-inspection, mutual inspection, full-time inspection and one-time jointing)”, and continuously summarize the maintenance experience and improve the quality of maintenance.