Installation Precautions For Air Shaft And Improved Life Span

Installation precautions for the air shaft

1. When installing the air-expansion shaft, the first thing to be determined is that the compressor that controls the air pressure is in a stable state, and a filter is directly installed between the compressor and the air-expansion shaft to prevent impurities from clogging the air pipe, thereby causing air leakage. ;

2. The direction of entry of air should be vertical to prevent damage to the valve;

3. When exhausting, the manufacturer of the inflatable shaft must use the standard exhaust port, and it is forbidden to use tools such as sharp hammer to avoid air leakage;

4. Install pressure gauge and pressure control device, and the air pressure must be controlled within the range of 3-8kg/cm;

5. When replacing the air nozzle, the socket wrench must be used. If there is a fault inside and need to be disassembled and repaired, please ask the professional maintenance personnel not to disassemble it yourself to avoid unnecessary loss;

6. Be careful to avoid injure the valve.

The increase in the service life of the inflatable shaft also greatly reduces the production management costs incurred by the customer for maintenance and repair.

Since the air-expansion shaft is made of specially processed pipe material, the stability of the material can make the air-expansion shaft (flat expansion sleeve) overcome the common defects such as deformation and bending in use, and ensure that the production line unit can stably operate under high-speed production. . Reliable and stable performance, bringing customers the reality of high-end products.

Convenience: Compared with ordinary high-quality structural steel, Feiyu's inflatable shaft has a very light weight, which reduces the physical strength of the production operator and the inconvenience of operation. Based on a width of 1350 mm, the commonly used air-expansion shaft (air-up shaft) has a weight of about 24 kg.