What Are The Characteristics Of The Photoelectric Guide Device?

Photoelectricity guide device Features of photoelectricity correction ① It is mainly used in printing and packaging, papermaking, film, textile and other industries where the curling needs to be controlled. ② Controlled by intelligent microcontroller. ③ Adjustable response speed is adjustable. ④ The belt can provide single electric eye or double electric eye correction and tracking. ⑤ Follow the line and heel.

Photoelectricity guide device Photoelectricity guide operation principle: The photoelectric detection switch detects the position of one side, picks up the position deviation signal, and performs logical operation on the position deviation signal to generate a control signal. The output DC24V voltage signal is used to drive the external actuator and correct the material. Serpentine deviation during operation controls the linear movement of the material.

Preparations before running:
1. Wiring: Connect the power supply, motor, limit switch and photoelectric head according to the wiring diagram. 2. The direction polarity of the motor should be determined correctly.
3. The limit switch controls the determination of the stopping direction of the motor.
4. Choice of material on the side or on the line.
5.Positioning and adjustment of photoelectric head.
6. Action description (controller automatic and manual mode selection).
7. Sensitivity potentiometer adjustment.

Photoelectricity correction device failure judgment and elimination
1. The motor does not rotate: open the casing and check the control board terminals, check whether the power supply and motor wiring are correct, check the power supply insurance, and check whether the control buttons on the panel are set correctly.
2. The photoelectric head does not light up, check whether the aerial plug connection cable is connected normally.
3. The set reference cannot be found, check the contrast color difference of the material, and eliminate the interference factors.