Common Sense Of Slitting Machine

In the modern packaging industry, slitting machines are a kind of equipment that is often manipulated before and after printing. The raw materials such as paper, plastic film and so on are cut before printing. As the passive packaging of flexible packaging increases, and consumer goods manufacturers value the key inefficiencies and pollutions at both ends, some manufacturers gradually change the process flow to package manual packaging with a passive level of passive packaging. As the volume of the coil is added from time to time, the position of the slitter is increasingly sought for, and the obligation to the slitter is higher.

The magnetic powder brake slitter is a plate stagnation device that cuts wide sheets of paper or film into a plurality of narrow-width materials, and is often used for paper stagnation and printing and packaging. The magnetic powder brake is a special passive performance component that transmits torque through the magnetic powder added to the duty gap. The magnetic current is modified to change the magnetic form of the magnetic powder, and then the transmitted torque is recuperated. It can be used for stepless speed regulation from zero head to synchronous speed. It is suitable for high speed section fine adjustment and medium and small power speed control system.

Cutting speed, scrap rate, non-operational occupation time, strength and so on. The cutting speed is certainly a help-seeking indicator that the slitting machine obeys. However, assuming that the scrap rate is low, not only will the obligation to form the whole machine be low, but the cost will rise. Similarly, it is assumed that the non-operation takes up a long time, such as: adjusting the machine, setting the knife, changing the tool, refueling, picking up the probe, changing the volume, processing the problem, etc., and simply increasing the speed of the slitter, there is no Meaning. Not to mention the strength of the slitting machine, not only will it affect the obligatory obedience of the slitting machine, but it will also affect the yield of the wind, and will also create poverty and unnecessary splurge for the next process. Therefore, the obligation to obey the machine is an appreciation point of view.

Generally, the unwinding tension is slightly larger than the sum of the reel tensions. In the past, a small number of slitting machines adopted a magnetic powder aggregator to control the tension of the tube bundle. However, the speed of the magnetic powder clutch could not be high. It was easy to form a high-speed argument of the magnetic powder during operation, which caused high temperature, shortened its life, and stuck in a long time, causing a stagnant operation. Touch the nose. With the development of technology, the servo drive technology has been deceived. At the beginning, a few adopt the vector frequency conversion electromechanical to the tension system of the tube slitting machine. The passive detection of the pendulum roller is passive, the man-machine interface is intuitive, and the tension system is more reliable and easy to a