Tel: +86-134-31394972
E-mail: sales@pre-webguidesystem.com
Tel: +86-134-31394972
E-mail: sales@pre-webguidesystem.com
The tension controller KTC-838A is a excessive-precision, multi-feature, all-digital wise tension controller that may be mixed with a anxiety detector to form a closed-loop tension control system, or an automatic calculation of hysteria thru a proximity transfer/encoder to...
The automated anxiety controller is designed for the clicking The automated anxiety controller is designed for the printing press. it has outputs for pre-starting automatic shaft trade of the duplexer of the printing press, and has an automatic cutting and decreasing output...
Tension controller person interface design is very clean to function The absolutely automatic tension controller can at once pressure the magnetic powder grab and the magnetic powder brake, in addition to the inverter and servo motor. different benefits encompass the...
Semi-automatic mode: The ultrasonic diameter principle is used to automatically detect the winding diameter, thereby adjusting the winding tension. In essence, it is a semi-closed-loop control of tension, which can not only automatically measure the winding and control torque...
The automatic tension controller is mainly composed of a tension detector, a high-precision A/D, a D/A converter, and a high-performance single-chip microcomputer. The automatic constant tension controller compares the tension of the coil material with the set target tension...
The primary function of the tension controller Normally, while the gadget is working, with the intention to ensure the rate of the device, a tension controller is often used to manipulate the jogging velocity of the system. this manipulate ought to be powerful for any...
The tension controller is a widely used technology in the textile, paper and other industries. The quality achieved is directly related to the production efficiency and quality of the product. Most of the early tension control was realized by means of analog electronic...
The tension sensor is a tension detector commonly used with a fully automatic tension controller, a magnetic powder clutch, and a magnetic powder brake. It detects the bending degree of the leaf spring under load by high precision, thereby detecting the tension feedback to...
The tension sensor is an instrument used to measure the tension value of the coil during tension control. Applications include pharmaceuticals, strain gauges, tensile strain gauges and compression strain gauges that are connected together in a bridge manner. When subjected to...
Taper calculations are only required for tension control of the winding. The purpose of the taper is only to make the end face of the receiving roll flat, so that the material roll does not have abnormal phenomena such as shrinkage and wrinkles. Tension, physics noun. When...
Tension open loop control in torque mode In the torque mode, a more stable tension control effect can be obtained without the tension detecting feedback device, and the structure is simple and the effect is good. However, the inverter needs to work in the closed-loop vector...
KTC800 manual tension controller is composed of high-speed microprocessor and high-power switching power supply. It can work in three modes of constant current, constant voltage and constant power (constant torque). It can automatically compensate the thermal attenuation of...
русский 
Deutsch
Latviešu
اردو
slovenščina
Polski
বাংলা
bosanski
magyar
Srbija jezik (latinica)
România limbi