The Slat-type Inflatable Shaft Mainly Adopts The Principle Of Expansion And Contraction

The torque of the differential sleeve is adjusted to achieve the adjustment of the required tension of each roll of material on the slit line, so that the relative slip between the slip sleeves is automatically adjusted, and the linear speed is automatically adjusted.

This solves the problems of broken bars, loose coils, and unrollers caused by changes in the thickness of the material due to uneven material thickness and tension during the slitting and rewinding of the ordinary air-expanded shaft, which avoids material loss caused by this. And can receive large and small rolls on the unified slip inflatable shaft. Winding speed is high. Because the air pressure can be adjusted without stopping, the machine's adaptable range and work efficiency are greatly improved.

Inflatable shaft matching clips, suitable for coils with larger inner diameters, equipped with safety chucks, can make the folding between the inflatable shaft and the machine convenient, saving time, labor and cost. The development of the inflatable shaft is based on the original traditional shaft, and through continuous technological innovation, it has been upgraded to a modern inflatable shaft, which has brought the above related machinery value to a new level.

The slat-type air-expanding shaft mainly uses the principle of expansion and contraction to achieve the expansion of the air-expanding shaft to tighten the paper tube to receive the material, and then discharge the material after discharging. Hose from Taiwan has good shrinkage properties and is not easy to burst. Suitable for items with large inner diameter.

It is a special type of rewinding and unwinding shaft, that is, a shaft that can expand on the surface after high-pressure inflation. The shaft that quickly retracts after being deflated is called an inflatable shaft. As long as the user provides his own air source, the air pressure is controlled within the range of 6-8 kg. When the drum core needs to be locked, as long as the inflation handle is inflated against the air nozzle on the inflation shaft, it can be completed. When feeding, press the sliding core on the air nozzle to deflate. All machines and equipment used for winding and unwinding can be used for inflatable shafts.

There are five possible leaks in the inflatable shaft:

1. Hose leak. This phenomenon is that the quality of the hose itself is not enough. After it is installed, there will be a leak.

2. There is a gap in the seal ring. Install the seal ring and put a circle of sealant on it.

3. The air nozzle is leaking, the inflatable nozzle is not installed properly, just replace it with another inflatable nozzle and install it.

3. The hose is broken. If this is the case, it will be troublesome. You need to remove the shaft head and replace it with a new hose.

5. The pressure ring is loose. The dehumidifier is relatively easy, just tighten the pressure ring.