Does The Decibel Of The Magnetic Powder Brake Have Any Effect On The Operator?

Nowadays, people's quality of life is getting higher and higher, and the requirements for the working environment are also changing. In order to adapt to the employees' ideas, the current magnetic powder brakes produced by our company have been discussed in various aspects during the operation. Magnetic powder brakes produced after 2015 have better control over noise.


The magnetic powder brake does not generate a connection sound such as a friction plate clutch/brake and a brake sound. However, since the magnetic powder clutch and the brake are friction clutches and brakes using electromagnetic powder of electromagnetic force as a medium, frictional noise occurs.

Although it does not affect the use of general machinery, the friction sound becomes large due to the influence of the internal magnetic powder distribution and the like. (Normally, after a trial run, or after a run time, the rubbing sound will disappear.

(1) When using at high altitude, the continuous slip power is allowed to decrease due to the influence of air pressure. Please pay attention. This product is suitable for use under 1000m.

(2) The magnetic powder clutch body may overflow magnetic powder oxidized powder and fine powder, so it cannot be used in a highly dust-proof environment.

(3) The magnetic powder clutch and brake do not generate a connection sound such as a friction plate clutch/brake and a brake sound. However, since the magnetic powder clutch and the brake are friction clutches and brakes using electromagnetic powder of electromagnetic force as a medium, frictional noise occurs. Although it does not affect the use of general machinery, the friction sound becomes large due to the influence of the internal magnetic powder distribution and the like.

(4) There is no problem in using the vibration level of a general printing machine, a paper processing machine, a packaging machine or the like without abnormal vibration, but it cannot be used in a machine having an impact force.

(5) A magnetic flux is generated when a voltage is applied to the clutch and the brake, and the shaft or the like is magnetized by the magnetic flux. If the magnetization affects product motion, it is recommended to use a non-magnetic material for installation, but this problem cannot be completely solved.

We look forward to the inspection of our products by each customer. Only your requirements are the driving force for us.